3.9 reboot question

[Frank Bax]

Last week, I installed 3.9 (from cdrom, of course) and I don't like the 
idea that reboot doesn't work.

$ sudo /sbin/reboot
/etc/rc.shutdown in progress...
/etc/rc.shutdown complete.
syncing disks... done
rebooting...

Then, nothing.  It just sits there until I press the reset button.  I 
haven't even installed any packages yet.  I was planning to deploy this 
machine as a remote server, but it will be awkward on those rare occasions 
when I want to reboot if it needs physical intervention to get started 
again.  What do I do now?  Is dmesg useful in this context? Here it is 
(cdrom drive was removed after install)...


OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3
,MWAIT,TM2,CNXT-ID
real mem  = 1039704064 (1015336K)
avail mem = 941907968 (919832K)
using 4278 buffers containing 52088832 bytes (50868K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(b3) BIOS, date 10/14/05, BIOS32 rev. 0 @ 0xfb4d0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd914
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd880/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 9 10 11
pcibios0: no compatible PCI ICU found: ICU vendor 0x1039 product 0x0964
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 661 PCI" rev 0x11
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00: aperture at 
0xe0000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 661: DMA, 
channel 0 configured to compatibility, channel 1 configur
ed to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 9, SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 9, version 
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 5, version 
1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: irq 10, 
version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: SiS EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: irq 10, 
address 00:0f:ea:3c:80:ab
icsphy0 at sis0 phy 1: ICS1893 10/100 PHY, rev. 1
pciide1 at pci0 dev 5 function 0 "SiS 180 SATA" rev 0x01: DMA
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302