3.9 reboot question

Tue May 2 07:03:44 PDT 2006

Could the machine be one of those ACPI-only systems? I'm not sure wat
ACPI is like in 3.9 but I seem to remember reading that it wasn't 100%
done yet.

> -----Original Message-----
> From: openbsd-newbies-bounces at sfobug.org 
> [mailto:openbsd-newbies-bounces at sfobug.org] On Behalf Of Frank Bax
> Sent: 02 May 2006 02:57 PM
> To: openbsd-newbies at sfobug.org
> Subject: 3.9 reboot question
> 
> 
> Last week, I installed 3.9 (from cdrom, of course) and I 
> don't like the 
> idea that reboot doesn't work.
> 
> $ sudo /sbin/reboot
> /etc/rc.shutdown in progress...
> /etc/rc.shutdown complete.
> syncing disks... done
> rebooting...
> 
> Then, nothing.  It just sits there until I press the reset button.  I 
> haven't even installed any packages yet.  I was planning to 
> deploy this 
> machine as a remote server, but it will be awkward on those 
> rare occasions 
> when I want to reboot if it needs physical intervention to 
> get started 
> again.  What do I do now?  Is dmesg useful in this context? 
> Here it is 
> (cdrom drive was removed after install)...
> 
> 
> OpenBSD 3.9 (GENERIC) #617: Thu Mar  2 02:26:48 MST 2006
>      deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 
> 686-class) 2.67 GHz
> cpu0: 
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,
> PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3
> ,MWAIT,TM2,CNXT-ID
> real mem  = 1039704064 (1015336K)
> avail mem = 941907968 (919832K)
> using 4278 buffers containing 52088832 bytes (50868K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(b3) BIOS, date 10/14/05, BIOS32 
> rev. 0 @ 0xfb4d0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 70102 dobusy 1 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd914
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd880/144 (7 entries)
> pcibios0: PCI Exclusive IRQs: 5 9 10 11
> pcibios0: no compatible PCI ICU found: ICU vendor 0x1039 
> product 0x0964
> pcibios0: Warning, unable to fix up PCI interrupt routing
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "SiS 661 PCI" rev 0x11
> ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00: aperture at 
> 0xe0000000, size 0x400000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 2 function 0 "SiS 964 ISA" rev 0x36
> pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x01: 661: DMA, 
> channel 0 configured to compatibility, channel 1 configur
> ed to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 disabled (no drives)
> auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: irq 
> 9, SiS7012 AC97
> ac97: codec id 0x414c4760 (Avance Logic ALC655)
> audio0 at auich0
> ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: 
> irq 9, version 
> 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0
> uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: 
> irq 5, version 
> 1.0, legacy support
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1
> uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> ohci2 at pci0 dev 3 function 2 "SiS 5597/5598 USB" rev 0x0f: irq 10, 
> version 1.0, legacy support
> usb2 at ohci2: USB revision 1.0
> uhub2 at usb2
> uhub2: SiS OHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 11
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: SiS EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 8 ports with 8 removable, self powered
> sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 
> 0x90: irq 10, 
> address 00:0f:ea:3c:80:ab
> icsphy0 at sis0 phy 1: ICS1893 10/100 PHY, rev. 1
> pciide1 at pci0 dev 5 function 0 "SiS 180 SATA" rev 0x01: DMA
> pciide1: using irq 11 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
> wd0: 16-sector PIO, LBA48, 76318MB, 156299375 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> it0 at isa0 port 0x290/8: IT87
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ef65 netmask ef65 ttymask ffe7
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> 
> _______________________________________________
> Openbsd-newbies mailing list
> Openbsd-newbies at sfobug.org
> http://mailman.theapt.org/listinfo/openbsd-newbies
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5256 bytes
Desc: not available
Url : http://mailman.theapt.org/pipermail/openbsd-newbies/attachments/20060502/eb5d5325/smime.bin